16 Ton Truck-Mounted Crane | 41 m Lift
Available for project configuration and export inquiry
This 16 ton truck-mounted crane is the highest-capacity configuration in this group. The supplied specification records a 16,000 kg maximum lifting capacity, 41 m maximum lifting height, eight-section U-shaped boom, and a 6.75 x 6.80 m double-section outrigger layout.
- Nominal class16 Ton
- Maximum lifting capacity16,000 kg
- Maximum lifting height41 m
- BoomEight-section U-shaped boom
- Outrigger span6.75 x 6.80 m, double-section
This 16 ton truck-mounted crane is the highest-capacity configuration in this group. The supplied specification records a 16,000 kg maximum lifting capacity, 41 m maximum lifting height, eight-section U-shaped boom, and a 6.75 x 6.80 m double-section outrigger layout.
Why choose this 16 ton truck-mounted crane?
The 18,000 kg custom chassis uses a 140 hp turbocharged 4108 engine, 900R20 tires, and front and rear operating stations. Its reach and lifting class target large equipment handling, structural projects, factory relocation, and rental fleets that can provide suitable access and prepared setup ground.
- 16,000 kg documented capacity. The configuration addresses heavier project loads when operated within the approved boom radius and load chart.
- 41 m maximum lifting height. The eight-section U-shaped boom extends the working range for structures, roofs, equipment, and elevated material placement.
- Wide double-section outriggers. The 6.75 x 6.80 m transverse and longitudinal span creates the largest documented support footprint in this five-model range.
Recommended applications
- Large machinery and factory equipment handling
- Steel structures and roofing projects
- Heavy prefabricated component placement
- Industrial and infrastructure maintenance
- Primary lifting equipment for rental fleets
Crane selection and export configuration
Maximum lifting capacity applies only at the boom length and working radius defined by the approved load chart. Share the load, lifting height, horizontal radius, ground conditions, access limits, and destination requirements before configuration is confirmed.
Compare the full truck-mounted crane range or send your lifting requirements for technical selection and an export quotation.
16 Ton truck-mounted crane specifications
| Specification | Value |
|---|---|
| Nominal product class | 16 ton |
| Documented maximum lifting capacity | 16,000 kg |
| Maximum lifting height | 41 m |
| Vehicle type | Custom site-crane chassis |
| Boom configuration | Eight-section U-shaped boom, 6 m sections |
| Outrigger span | 6.75 x 6.80 m, double-section |
| Transport dimensions | 9.2 x 2.34 x 3.2 m |
| Documented machine weight | 18,000 kg |
| Engine | 4108 turbocharged engine |
| Engine power | 140 hp |
| Electric motor power | 15 kW |
| Main/auxiliary hook lifting speed | 100-85 m/min |
| Rotation speed | 0-3 r/min |
| Main hook winch | Inclined-shaft winch |
| Auxiliary hook winch | Inclined-shaft winch |
| Reducer | Planetary reducer |
| Slewing bearing | 1,450 mm |
| Hydraulic pump | 50/40 pump, engine and electric motor |
| Frame | Special manganese-steel telescopic frame |
| Axles | 153 front and rear axles |
| Steering | Hydraulic power assisted |
| Brake system | Air brake |
| Tires | 900R20 radial tires |
| Maximum travel speed | 60 km/h |
| Wheelbase | 2,900 mm |
Configuration note: Values are based on the supplied parameter sheet. Final lifting performance depends on boom length, working radius, outrigger setup, load chart, chassis configuration, and destination requirements.
Operating features and configuration options
- Front and rear operating stations
- Double-section outriggers with a 6.75 x 6.80 m span
- Main and auxiliary inclined-shaft winches
- Air brakes, hydraulic power steering, and 0-3 r/min rotation
- Optional torque limiter, limit device, camera, work basket, bucket, and air conditioning
Frequently asked questions
What are the main lifting limits of this model?
This 16 ton configuration has a documented maximum lifting capacity of 16,000 kg and a maximum lifting height of 41 m. The maximum capacity is not available at every boom length or working radius. Use the approved load chart for the final configuration.
Can the chassis and crane equipment be customized?
Chassis, engine, cargo deck, winch, outrigger, work basket, bucket, camera, limiter, and comfort options depend on the model and destination market. Registration, emissions, payload, and service requirements must be confirmed before production.
What information is needed for an accurate quotation?
Provide the load weight and size, center of gravity, lifting height, horizontal radius, jobsite access, ground conditions, destination country, transport needs, and required options. These details allow the technical team to check capacity, stability, chassis, shipping, and pricing.
Request a quotation
Send the following project details for technical review:
- Load weight, dimensions, and center of gravity
- Required lifting height and horizontal working radius
- Jobsite access, ground conditions, and outrigger space
- Destination country, road registration, and emissions requirements
- Cargo deck, work basket, bucket, camera, and safety option needs
..Need to Know..
Specialized Vehicle FAQ
.. contact us ..