4 Ton truck-mounted crane specifications
| Specification | Value |
|---|---|
| Nominal product class | 4 ton |
| Documented maximum lifting capacity | 4,000 kg |
| Maximum lifting height | 12 m |
| Chassis model | Foton M5 / BJ1045V9JBA-33 |
| Engine | Quanchai Q25A-150E60 |
| Rated power | 110 kW / 152 hp |
| Transmission | Eight-speed high/low range |
| Steering | Power assisted |
| Brake system | Air brake |
| Wheelbase | 3,360 mm |
| Tires | 7.00R16LT |
| Maximum travel speed | 115 km/h |
| Boom configuration | Four sections, 3 m sections |
| Basic to extended boom length | 3.3-9.8 m |
| Boom extension | Return-rope arrangement |
| Maximum lifting moment | 8.4; unit not specified in source |
| Boom angle | 0-75 degrees |
| Rotation | 360 degrees |
| Rotation speed | 2.5 r/min |
| Outrigger span | 4,400 / 4,400 mm front/rear |
| Cargo deck | 3,500 x 2,000 mm |
| Transport dimensions | 5,995 x 2,100 x 3,100 mm |
Configuration note: Values are based on the supplied parameter sheet. Final lifting performance depends on boom length, working radius, outrigger setup, load chart, chassis configuration, and destination requirements.
Operating features and configuration options
- 360-degree crane rotation with a documented 2.5 r/min rotation speed
- Front and rear outriggers with 4,400 mm documented spans
- Air-brake chassis with power steering
- Four-section boom with return-rope extension arrangement
- Optional equipment should be confirmed against the final project specification
Frequently asked questions
What are the main lifting limits of this model?
This 4 ton configuration has a documented maximum lifting capacity of 4,000 kg and a maximum lifting height of 12 m. The maximum capacity is not available at every boom length or working radius. Use the approved load chart for the final configuration.
Can the chassis and crane equipment be customized?
Chassis, engine, cargo deck, winch, outrigger, work basket, bucket, camera, limiter, and comfort options depend on the model and destination market. Registration, emissions, payload, and service requirements must be confirmed before production.
What information is needed for an accurate quotation?
Provide the load weight and size, center of gravity, lifting height, horizontal radius, jobsite access, ground conditions, destination country, transport needs, and required options. These details allow the technical team to check capacity, stability, chassis, shipping, and pricing.
Request a quotation
Send the following project details for technical review:
- Load weight, dimensions, and center of gravity
- Required lifting height and horizontal working radius
- Jobsite access, ground conditions, and outrigger space
- Destination country, road registration, and emissions requirements
- Cargo deck, work basket, bucket, camera, and safety option needs
