45m aerial work platform truck specifications
| Specification | Value |
|---|---|
| Maximum working height | 45 m |
| Outreach at maximum height | 3 m |
| Maximum working outreach | 28 m |
| Working height at maximum outreach | 31 m |
| Rated platform load | 400 kg |
| Chassis | Dongfeng Tianjin |
| Engine | Cummins, 230 hp |
| Transport dimensions | 9,720 x 2,550 x 3,920 mm |
| Gross vehicle mass | 17,700 kg |
| Boom | Seven-section hexagonal synchronized telescopic boom |
| Outrigger span | 8,250 mm transverse / 8,378 mm longitudinal |
| Platform size | 3,200 x 850 x 1,200 mm |
| Maximum road speed | 98 km/h |
| Control voltage | 24 V |
Configuration note: Specifications are based on the supplied product parameter sheet. Chassis, engine, dimensions, emissions configuration, and optional equipment may change by market and final order.
Safety and operating features
- Load sensor and wind-speed monitor
- Automatic outreach limiting and soft-ground protection
- Dual slewing reducers and twin luffing cylinders
- Three-section X-type hydraulic outriggers
- CAN bus controls, emergency operation, and hydrostatic automatic leveling
Frequently asked questions
What are the main working limits of this model?
The 45m aerial work platform truck provides a maximum working height of 45m, maximum outreach of 28 m, and a rated platform capacity of 400 kg. Always use the approved load chart and operating manual for the final configuration.
Can the chassis and equipment configuration be customized?
Available chassis, engine, control, outrigger, and platform options depend on the model and destination market. Share local registration, emissions, payload, and service requirements so the technical team can confirm a suitable configuration before production.
What information is needed for an accurate quotation?
Provide the required working height and outreach, platform load, preferred chassis, destination country, emissions standard, application, and expected operating conditions. These details help confirm the model, options, shipping plan, and commercial quotation.
Request a quotation
Send the following project details for a technical recommendation:
- Required working height and outreach
- Platform load and platform size
- Preferred chassis or local chassis requirements
- Emissions standard, destination country, and operating conditions
