50m Truck-Mounted Aerial Work Platform
Available for export and project configuration
This 50m aerial work platform truck delivers a 50 m maximum working height, 32 m outreach, and a 400 kg platform on a SINOTRUK SITRAK chassis. The long working radius is suited to major industrial, utility, facade, and infrastructure projects where repositioning the truck is difficult.
- Working height50m
- Maximum outreach32 m
- Platform capacity400 kg
- Rotation360-degree continuous rotation
- ChassisSINOTRUK SITRAK
This 50m aerial work platform truck delivers a 50 m maximum working height, 32 m outreach, and a 400 kg platform on a SINOTRUK SITRAK chassis. The long working radius is suited to major industrial, utility, facade, and infrastructure projects where repositioning the truck is difficult.
Why choose this 50m aerial work platform truck?
The seven-section multi-sided boom uses synchronized telescopic movement with continuous 360-degree rotation. A three-section X-outrigger system, twin luffing cylinders, load sensing, wind monitoring, and automatic leveling support high-reach operation.
- 32 m horizontal outreach. The long lateral range improves access over setbacks, machinery, landscaping, and traffic zones.
- Heavy-duty SITRAK chassis. The 18,000 kg vehicle configuration provides the foundation for the 50 m boom system.
- Large work platform. A 3,000 x 900 x 1,200 mm platform and 400 kg rating support personnel and service equipment.
Recommended applications
- High-rise facade and roof service
- Large industrial plants and energy facilities
- Bridge, airport, and transport infrastructure
- Power transmission, lighting, and telecom projects
Export configuration and project matching
TRODAT can review the working height, outreach, platform load, chassis preference, destination regulations, and jobsite conditions before confirming a configuration. Final dimensions and component selections should be checked against the approved quotation and technical drawing.
Compare the full aerial work platform truck range or send your project requirements for a model recommendation and export quotation.
50m aerial work platform truck specifications
| Specification | Value |
|---|---|
| Maximum working height | 50 m |
| Outreach at maximum height | 3 m |
| Maximum working outreach | 32 m |
| Working height at maximum outreach | 38 m |
| Rated platform load | 400 kg |
| Chassis | SINOTRUK SITRAK |
| Engine | SINOTRUK MAN, 250 hp |
| Transport dimensions | 10,120 x 2,550 x 3,920 mm |
| Gross vehicle mass | 18,000 kg |
| Boom | Seven-section multi-sided synchronized telescopic boom |
| Outrigger span | 8,250 mm transverse / 8,378 mm longitudinal |
| Platform size | 3,000 x 900 x 1,200 mm |
| Maximum road speed | 98 km/h |
| Control voltage | 24 V |
Configuration note: Specifications are based on the supplied product parameter sheet. Chassis, engine, dimensions, emissions configuration, and optional equipment may change by market and final order.
Safety and operating features
- Load sensor and wind-speed monitor
- Automatic working-radius limitation and soft-ground protection
- Dual slewing reducers and twin luffing cylinders
- Three-section X-type hydraulic outriggers
- CAN bus control, emergency operation, and hydraulic automatic leveling
Frequently asked questions
What are the main working limits of this model?
The 50m aerial work platform truck provides a maximum working height of 50m, maximum outreach of 32 m, and a rated platform capacity of 400 kg. Always use the approved load chart and operating manual for the final configuration.
Can the chassis and equipment configuration be customized?
Available chassis, engine, control, outrigger, and platform options depend on the model and destination market. Share local registration, emissions, payload, and service requirements so the technical team can confirm a suitable configuration before production.
What information is needed for an accurate quotation?
Provide the required working height and outreach, platform load, preferred chassis, destination country, emissions standard, application, and expected operating conditions. These details help confirm the model, options, shipping plan, and commercial quotation.
Request a quotation
Send the following project details for a technical recommendation:
- Required working height and outreach
- Platform load and platform size
- Preferred chassis or local chassis requirements
- Emissions standard, destination country, and operating conditions
Related Products
..Need to Know..
Specialized Vehicle FAQ
.. contact us ..