TDAL 640-450 specifications
| Specification | Value |
|---|---|
| Modelo | TDAL 640-450 |
| Equipment dimensions (L x W x H) | 9,960 x 2,440 x 3,600 mm |
| Equipment weight | 13,960 kg |
| Maximum working height | 64 m |
| Maximum working radius | 18 m |
| Maximum platform capacity | 400 kg |
| Outrigger type | Two-stage H-type outriggers |
| Ladder configuration | Nine-section synchronized telescopic ladder |
| Documented rotation range | +/-180 degrees, limited |
| Platform dimensions (L x W x H) | 1,450 x 1,000 x 450 mm |
| Maximum outrigger longitudinal span | 5,600 mm |
| Maximum outrigger lateral span | 6,050 mm |
Specification note: Values are transcribed from the supplied parameter sheet. Model names have been standardized to TDAL for this website. Confirm the final chassis, load chart, production drawing, safety devices, registration documents, and operating limits before purchase.
Operating and safety considerations
- Inspect the parking area, surface bearing capacity, slope, overhead power lines, trees, balconies, and public access before setup.
- Deploy the two-stage h-type outriggers on suitable pads and level the vehicle within the manufacturer’s limits.
- Keep the load centered and secured; account for dimensions, wind area, center of gravity, personnel, and tools within the approved platform load.
- Use slow, controlled extension and rotation. Stop work if wind, visibility, ground movement, abnormal noise, or communication creates uncertainty.
- Operators must follow the final manual, training requirements, inspection schedule, and destination-country regulations.
Frequently asked questions
How many floors can the TDAL 640-450 reach?
The source lists a maximum working height of 64 m, but floor coverage depends on floor height, parking distance, operating angle, obstacles, and the approved working envelope. Select a model with practical height and radius margin rather than planning at the stated limit.
Can the platform always carry 400 kg?
The supplied sheet lists 400 kg as the maximum platform capacity. Allowable load can vary with configuration, extension, radius, load shape, wind, and operating rules. Use the final load chart and manual; never exceed the approved limit.
What information is needed for an accurate quotation?
Provide the required height and horizontal reach, load weight and dimensions, building and road access, parking and outrigger space, ground conditions, nearby obstacles, destination country, chassis preference, registration requirements, and expected operating frequency.
Request a quotation
Send these project details for technical review:
- Target working height and horizontal distance from the truck to the receiving point
- Material type, dimensions, weight, center of gravity, and required batch frequency
- Road width, parking area, ground condition, slope, and available outrigger space
- Nearby power lines, trees, balconies, signs, and other access restrictions
- Destination country, chassis, road registration, emissions, and delivery requirements
