icon

TRODAT supplies aerial work platform trucks, truck-mounted cranes and ladder lift trucks for access, lifting and material handling projects. Contact us to discuss vehicle selection, project configuration and support requirements for your destination market.

+86-0536-2222696

NO.1070, rue Minsheng, district de Kuiwen, Weifang, Shandong, Chine.

                       
50m Truck-Mounted Aerial Work Platform product image
50m Truck-Mounted Aerial Work Platform product view

50m Truck-Mounted Aerial Work Platform

  • 50m
  • 32 m
  • 400 kg

Available for export and project configuration

This 50m aerial work platform truck delivers a 50 m maximum working height, 32 m outreach, and a 400 kg platform on a SINOTRUK SITRAK chassis. The long working radius is suited to major industrial, utility, facade, and infrastructure projects where repositioning the truck is difficult.

  • Working height50m
  • Maximum outreach32 m
  • Platform capacity400 kg
  • Rotation360-degree continuous rotation
  • ChassisSINOTRUK SITRAK

This 50m aerial work platform truck delivers a 50 m maximum working height, 32 m outreach, and a 400 kg platform on a SINOTRUK SITRAK chassis. The long working radius is suited to major industrial, utility, facade, and infrastructure projects where repositioning the truck is difficult.

50mWorking height
32 mMaximum outreach
400 kgPlatform capacity
360-degree continuous rotationRotation

Why choose this 50m aerial work platform truck?

The seven-section multi-sided boom uses synchronized telescopic movement with continuous 360-degree rotation. A three-section X-outrigger system, twin luffing cylinders, load sensing, wind monitoring, and automatic leveling support high-reach operation.

  • 32 m horizontal outreach. The long lateral range improves access over setbacks, machinery, landscaping, and traffic zones.
  • Heavy-duty SITRAK chassis. The 18,000 kg vehicle configuration provides the foundation for the 50 m boom system.
  • Large work platform. A 3,000 x 900 x 1,200 mm platform and 400 kg rating support personnel and service equipment.

Recommended applications

  • High-rise facade and roof service
  • Large industrial plants and energy facilities
  • Bridge, airport, and transport infrastructure
  • Power transmission, lighting, and telecom projects

Export configuration and project matching

TRODAT can review the working height, outreach, platform load, chassis preference, destination regulations, and jobsite conditions before confirming a configuration. Final dimensions and component selections should be checked against the approved quotation and technical drawing.

Compare the full aerial work platform truck range or send your project requirements for a model recommendation and export quotation.

50m aerial work platform truck specifications

Specification Value
Maximum working height 50 m
Outreach at maximum height 3 m
Maximum working outreach 32 m
Working height at maximum outreach 38 m
Rated platform load 400 kg
Chassis SINOTRUK SITRAK
Engine SINOTRUK MAN, 250 hp
Transport dimensions 10,120 x 2,550 x 3,920 mm
Gross vehicle mass 18,000 kg
Boom Seven-section multi-sided synchronized telescopic boom
Outrigger span 8,250 mm transverse / 8,378 mm longitudinal
Platform size 3,000 x 900 x 1,200 mm
Maximum road speed 98 km/h
Control voltage 24 V

Configuration note: Specifications are based on the supplied product parameter sheet. Chassis, engine, dimensions, emissions configuration, and optional equipment may change by market and final order.

Safety and operating features

  • Load sensor and wind-speed monitor
  • Automatic working-radius limitation and soft-ground protection
  • Dual slewing reducers and twin luffing cylinders
  • Three-section X-type hydraulic outriggers
  • CAN bus control, emergency operation, and hydraulic automatic leveling

Frequently asked questions

What are the main working limits of this model?

The 50m aerial work platform truck provides a maximum working height of 50m, maximum outreach of 32 m, and a rated platform capacity of 400 kg. Always use the approved load chart and operating manual for the final configuration.

Can the chassis and equipment configuration be customized?

Available chassis, engine, control, outrigger, and platform options depend on the model and destination market. Share local registration, emissions, payload, and service requirements so the technical team can confirm a suitable configuration before production.

What information is needed for an accurate quotation?

Provide the required working height and outreach, platform load, preferred chassis, destination country, emissions standard, application, and expected operating conditions. These details help confirm the model, options, shipping plan, and commercial quotation.

Request a quotation

Send the following project details for a technical recommendation:

  • Required working height and outreach
  • Platform load and platform size
  • Preferred chassis or local chassis requirements
  • Emissions standard, destination country, and operating conditions

Contact TRODAT for technical selection and pricing

..Need to Know..

Specialized Vehicle FAQ

TRODAT focuses on three vehicle categories: aerial work platform trucks for elevated personnel access, truck-mounted cranes for lifting and delivery support, and TDAL ladder lift trucks for inclined material transfer. Use the product catalog to compare categories and model references, then send the intended application for a specific recommendation.

Start with the task rather than a headline number. Tell us whether you need personnel access, suspended-load handling or material transfer, then provide the required height, working radius, load, site access and ground conditions. The final vehicle and configuration must be confirmed against model-specific technical information and local operating requirements.

Please include the preferred category or model, intended task, load weight and dimensions, required height or radius, destination country, chassis or road-use requirements and requested documents. Site photographs or a simple sketch can help clarify access, setup space, overhead obstacles and the expected working position.

We can discuss vehicle configuration, technical documents and the information needed for an international quotation. Registration, import, emissions and road-use requirements vary by destination, so the buyer should confirm local rules with the relevant authority. Scope, documents, timing and commercial terms are confirmed in the written offer.

After-sales support is arranged according to the confirmed vehicle configuration and agreement. Discussions may cover operating documentation, technical clarification, parts questions and service coordination. Operators still need appropriate competence, model-specific familiarization and compliance with the manufacturer instructions and local safety requirements.

.. Contactez-nous ..

Posez-nous toutes les questions que vous souhaitez poser