28 m Ladder Lift Truck | TDAL 280-400
Available for site-specific configuration and export inquiry
The TDAL 280-400 ladder lift truck provides a documented 28 m working height, 12 m radius, and 400 kg maximum platform capacity for elevated material handling projects.
- ModelTDAL 280-400
- Maximum working height28 m
- Maximum working radius12 m
- Maximum platform capacity400 kg
- LadderSeven-section synchronized telescopic ladder
- OutriggersH-type outriggers, 4,100 mm x 3,800 mm
The TDAL 280-400 ladder lift truck is designed for moving materials, furniture, appliances, tools, and installation equipment to elevated receiving points. The supplied specification records a 28 m maximum working height, 12 m maximum working radius, and 400 kg maximum platform capacity.
Why choose the TDAL 280-400 ladder lift truck?
The compact transport envelope and H-type support layout suit frequent urban jobs where the truck must reposition between homes, storefronts, roofs, and maintenance points. The documented 12 m working radius helps when the chassis cannot park directly beside the receiving point.
- Compact 28 m working range. The smaller transport size supports access to tighter streets and short-duration projects.
- 400 kg documented platform capacity. The platform can be configured for furniture, appliances, roofing materials, tools, and other site loads within the approved operating limits.
- Seven synchronized sections. The ladder structure is designed for controlled extension during repeated loading and unloading cycles.
Recommended applications
- Furniture and appliance lifting for moving services
- Roofing membrane, tile, board, and construction-material delivery
- Storefront signs, air-conditioning, and solar equipment installation
- Property maintenance and low-to-medium-rise facade work
- Urban rental projects with frequent relocation
Site planning and export configuration
Maximum height, radius, and platform capacity are separate limits and are not available together in every operating position. Final selection must follow the approved load chart, operating manual, ground requirements, wind limits, and local road and safety rules.
Compare the complete ladder lift truck range or send your project conditions for model selection, chassis configuration, delivery planning, and an export quotation.
TDAL 280-400 specifications
| Specification | Value |
|---|---|
| Model | TDAL 280-400 |
| Equipment dimensions (L x W x H) | 5,995 x 1,900 x 2,850 mm |
| Equipment weight | 4,170 kg |
| Maximum working height | 28 m |
| Maximum working radius | 12 m |
| Maximum platform capacity | 400 kg |
| Outrigger type | H-type outriggers |
| Ladder configuration | Seven-section synchronized telescopic ladder |
| Documented rotation range | +/-180 degrees, limited |
| Platform dimensions (L x W x H) | 1,100 x 1,000 x 450 mm |
| Maximum outrigger longitudinal span | 4,100 mm |
| Maximum outrigger lateral span | 3,800 mm |
Specification note: Values are transcribed from the supplied parameter sheet. Model names have been standardized to TDAL for this website. Confirm the final chassis, load chart, production drawing, safety devices, registration documents, and operating limits before purchase.
Operating and safety considerations
- Inspect the parking area, surface bearing capacity, slope, overhead power lines, trees, balconies, and public access before setup.
- Deploy the h-type outriggers on suitable pads and level the vehicle within the manufacturer’s limits.
- Keep the load centered and secured; account for dimensions, wind area, center of gravity, personnel, and tools within the approved platform load.
- Use slow, controlled extension and rotation. Stop work if wind, visibility, ground movement, abnormal noise, or communication creates uncertainty.
- Operators must follow the final manual, training requirements, inspection schedule, and destination-country regulations.
Frequently asked questions
How many floors can the TDAL 280-400 reach?
The source lists a maximum working height of 28 m, but floor coverage depends on floor height, parking distance, operating angle, obstacles, and the approved working envelope. Select a model with practical height and radius margin rather than planning at the stated limit.
Can the platform always carry 400 kg?
The supplied sheet lists 400 kg as the maximum platform capacity. Allowable load can vary with configuration, extension, radius, load shape, wind, and operating rules. Use the final load chart and manual; never exceed the approved limit.
What information is needed for an accurate quotation?
Provide the required height and horizontal reach, load weight and dimensions, building and road access, parking and outrigger space, ground conditions, nearby obstacles, destination country, chassis preference, registration requirements, and expected operating frequency.
Request a quotation
Send these project details for technical review:
- Target working height and horizontal distance from the truck to the receiving point
- Material type, dimensions, weight, center of gravity, and required batch frequency
- Road width, parking area, ground condition, slope, and available outrigger space
- Nearby power lines, trees, balconies, signs, and other access restrictions
- Destination country, chassis, road registration, emissions, and delivery requirements
..Need to Know..
Specialized Vehicle FAQ
.. contact us ..