27m Truck-Mounted Aerial Work Platform
Available for export and project configuration
This 27m aerial work platform truck combines a 27 m maximum working height, 12 m maximum outreach, and a 200 kg platform rating with a compact rear-wheel-drive chassis. Multiple chassis and engine options allow importers and fleet operators to match the vehicle to payload, service, and regional requirements.
- Working height27m
- Maximum outreach12 m
- Platform capacity200 kg
- Rotation360-degree continuous rotation
- ChassisJMC, JAC, or ISUZU options
This 27m aerial work platform truck combines a 27 m maximum working height, 12 m maximum outreach, and a 200 kg platform rating with a compact rear-wheel-drive chassis. Multiple chassis and engine options allow importers and fleet operators to match the vehicle to payload, service, and regional requirements.
Why choose this 27m aerial work platform truck?
The five-section hexagonal boom, continuous 360-degree rotation, and front-V/rear-H outrigger layout are suited to municipal maintenance, utilities, construction finishing, and industrial inspection where both vertical height and side reach are required.
- Multiple chassis options. JMC Shunda, JAC Kangling, and ISUZU configurations support different market and service preferences.
- Flexible three-mode control. Remote, electric, and manual operation provides practical control redundancy.
- Automatic leveling support. Hydrostatic automatic leveling and individually adjustable outriggers help simplify site setup.
Recommended applications
- Municipal road and lighting maintenance
- Power and telecom line access
- Construction and facade installation
- Industrial plant inspection and repair
Export configuration and project matching
TRODAT can review the working height, outreach, platform load, chassis preference, destination regulations, and jobsite conditions before confirming a configuration. Final dimensions and component selections should be checked against the approved quotation and technical drawing.
Compare the full aerial work platform truck range or send your project requirements for a model recommendation and export quotation.
27m aerial work platform truck specifications
| Specification | Value |
|---|---|
| Maximum working height | 27 m |
| Outreach at maximum height | 3 m |
| Maximum working outreach | 12 m |
| Working height at maximum outreach | 17 m |
| Rated platform load | 200 kg |
| Chassis options | JMC Shunda / JAC Kangling / ISUZU |
| Engine options | Quanchai / ISUZU, 115-122 hp |
| Transport dimensions | 5,995 x 2,000 x 2,980 mm |
| Gross vehicle mass | 4,495 kg |
| Boom | Five-section hexagonal working boom |
| Outrigger span | 4,140 mm transverse / 4,300 mm longitudinal |
| Platform size | 1,400 x 710 x 1,200 mm |
| Rotation | 360-degree continuous rotation |
| Control voltage | 12 V |
Configuration note: Specifications are based on the supplied product parameter sheet. Chassis, engine, dimensions, emissions configuration, and optional equipment may change by market and final order.
Safety and operating features
- Automatic upper/lower control interlock
- Automatic emergency pump and platform emergency stop
- Automatic working-radius limitation
- Soft-ground outrigger detection, warning beacons, and LED work lights
- 220 V leakage protection for external tools and equipment
Frequently asked questions
What are the main working limits of this model?
The 27m aerial work platform truck provides a maximum working height of 27m, maximum outreach of 12 m, and a rated platform capacity of 200 kg. Always use the approved load chart and operating manual for the final configuration.
Can the chassis and equipment configuration be customized?
Available chassis, engine, control, outrigger, and platform options depend on the model and destination market. Share local registration, emissions, payload, and service requirements so the technical team can confirm a suitable configuration before production.
What information is needed for an accurate quotation?
Provide the required working height and outreach, platform load, preferred chassis, destination country, emissions standard, application, and expected operating conditions. These details help confirm the model, options, shipping plan, and commercial quotation.
Request a quotation
Send the following project details for a technical recommendation:
- Required working height and outreach
- Platform load and platform size
- Preferred chassis or local chassis requirements
- Emissions standard, destination country, and operating conditions
Related Products
..Need to Know..
Specialized Vehicle FAQ
.. contact us ..